LS-II全自動平面口罩生產線

LS-II Fully automatic plane mask production line

一次性三層口罩：

Disposable three-layer mask:

 

屬于平面口罩的一種，一次性三層口罩是用兩層無紡布和過濾紙制作而成；一次性三層口罩是由專業用于醫療衛生的纖維無紡布內兩層，中間增加一層過濾防菌達99%以上的過濾熔噴布經超聲波焊接而成，鼻梁處采用環保全塑條，不含任何金屬，配帶透氣、舒適。過濾效果B.F.E高達99%，尤其適合電子類工廠；所需的原材料有：無紡布上下2層（克重在25克左右），中間一層為熔噴布，鼻梁絲塑條PP5.0mm*0.55mrr，耳帶：圓帶2.5-3MM直徑，成品規格：175*95MM，適用材料：PP無紡布 復合纖維，品質要求：符合醫藥行業一次性使用醫用口罩標準（YYT0969-2013)中的制作標準無漏粘無破損有鼻條，有掛耳。

Belongs to a kind of plane mask, disposable three-layer mask is made of two layers of non-woven cloth and filter paper;The disposable three-layer mask is made of two layers of professional non-woven fiber fabric used for medical and health care, with an additional layer of filter melt-blown cloth with more than 99% anti-bacteria filtration welded by ultrasonic. The bridge of the nose is made of environment-friendly plastic strip, free of any metal, breathable and comfortable.Filtration efficiency of up to 99%, especially suitable for electronic factories;Needed raw materials are: non-woven top and bottom layer 2 on 25 grams (g), melt-blown fabric for the middle layer, the bridge of the nose wire plastic article PP5.0 mm * 0.55 MRR, ear belt: circular band 2.5 3 mm in diameter, the finished product specification: 175 * 95 mm, applicable material: PP non-woven composite fiber, quality requirements, in line with the pharmaceutical industry standard of disposable surgical masks (YYT0969-2013) of the production standard without glue without damage the nose, with hanging ears.

 

 

 

 

 

 

技術參數

Technical parameters

設備尺寸 Equipment size	6500*3500*1950mm 6500*3500*1950mm
設備重量 Equipment weight	設備總重≤2000kg   Total weight of equipment ≤2000kg 地面承重≥200/㎡ Ground bearing pressure≥200/㎡
設備顏色 Equipment color	門板暖灰/橘紋白/環保綠/機架鋁型材 Warm gray/orange white/green/frame aluminum
設備工作電源 Equipment power supply	220VAC+5% 50HZ 接地保護 額定功率≤10KW（包扣超聲波） 220VAC+5% 50HZ ground protection rated power ≤10KW (buckle ultrasonic)
壓縮空氣 Compressed air	0.4-0.6MP（除水，無油，過濾穩壓后的清潔空氣） 使用流量約300L/min 0.4-0.6MP (no oil except water, clean air after filtering and stabilizing)     The flow rate is about 300L/min
生產效率 Production efficiency	≥100個/min ≥100 pcs/min
設備產品合格率 Qualification rate of equipment products	99%（原來料及人為操作導致除外） 99% (Except original material and human operation)
設備生產環境 Equipment production environment	一般車間環境均可（無腐蝕性氣體，無粉塵） General workshop environment can be (no corrosive gas, no dust)

設備特點：

Equipment features:

1、采用鋁合金結構，美觀堅固不生銹。

1, The use of aluminum alloy structure, beautiful and strong without rust.

2、電腦PLC編程控制，穩定性高，故障率低，噪音少。

2, Computer PLC programming control, high stability, low failure rate, less noise.

3、采用進口伺服馬達，步進馬達驅動，精度高。

3. Imported servo motor, stepper motor drive, high precision.

4、光電檢測原料，避免失誤減少浪費。

4. Photoelectric testing of raw materials to avoid mistakes and reduce waste.

5、根據需要可以一臺本體鏈接1-3臺內耳帶機或外耳帶機。

5. One ontology can be connected to 1-3 inner ear belt machines or outer ear belt machines as required.

6、機臺采用滑輪及固定腳，移動方便快捷，固定性強，不動搖。

6, The machine adopts pulley and fixed foot, convenient and fast movement, strong fixation, do not shake.

7、該機種配置全新高級輸送帶，精確度高，不用人工清點，只需整理和包裝。

7, This machine is equipped with a new senior conveyor belt, high accuracy, no manual count, only need to arrange and pack.

8、設備可以根據產品需求設置改裝，產品尺寸大小，長度厚度。

8. The equipment can be modified according to product requirements, product size, length and thickness.

9、可根據不同生產訂單，配置不同的耳帶機，經濟實用。

9, According to different production orders, configuration of different ear belt machine, economic and practical.